Pure Tone Glow™ x Kimberley Walsh LED Face Mask is a lightweight, high-output at-home LED light therapy mask designed to help reduce the appearance of fine lines and wrinkles, improve the look of firmness, calm the appearance of redness and restore a healthier-looking glow. Created by Pure Tone Aesthetics in collaboration with Kimberley Walsh, Pure Tone Glow™ combines 216 LEDs, five carefully selected light wavelengths and an irradiance output of 30–52 mW/cm² to support a more advanced at-home LED skincare routine. Red 630nm, Blue 415nm, Yellow 590nm, Infrared 850nm and Deep Near-Infrared 1072nm light work together to target multiple visible skin concerns, including dullness, uneven tone, blemish-prone skin, fine lines and loss of radiance. Made from soft, flexible silicone, the mask weighs only 93g and features built-in eye protection, a comfortable non-contact 10–15mm light distance and an IP67 waterproof design for easy cleaning. Pure Tone Glow™ also includes Radiance Dual-Action Serum, formulated with Niacinamide, Peptides, Hyaluronic Acid and antioxidants to hydrate, brighten and support smoother, fresher-looking skin. Apply the serum to clean, dry skin, wear the mask for your chosen treatment cycle, then follow with your usual moisturiser. What’s included: Pure Tone Glow™ LED Face Mask, Remote Control, USB-C Charging Cable, Storage Case and User Guide.
How to Use Pure Tone Glow LED Face Mask 1. Cleanse your skin - Begin with freshly cleansed, dry skin. This helps remove impurities and prepares your skin for your LED mask session. 2. Apply Radiance Dual-Action Serum - Apply a few drops of Radiance Dual-Action Serum evenly across the face and neck. This helps hydrate and prepare the skin before your light therapy treatment. 3. Fit the mask comfortably - Place Pure Tone Glow LED Face Mask over your face and adjust the fit so it feels comfortable. The non-contact design is created to sit approximately 10–15mm from the skin. 4. Select your treatment time - Choose your preferred session time. Pure Tone Glow can be used for 10, 15, 20 or 30 minutes depending on your skin’s sensitivity and routine. 5. Relax during your treatment - Use the mask while relaxing at home. The soft silicone design, built-in eye protection and lightweight 93g structure make it comfortable for regular use. 6. Finish your skincare routine - After your session, reapply a little more Radiance Dual-Action Serum if desired, then follow with your moisturiser to help seal in hydration. 7. Repeat consistently - For best results, use Pure Tone Glow 3–5 times per week. Many users notice a fresher post-treatment glow quickly, while improvements in fine lines, firmness, tone and clarity usually build gradually with consistent use.
Free delivery on all order over £75 (exc. Bulky Item Delivery)
Super Saver Delivery
£2.99
Standard Delivery
£3.99
Express Delivery
£5.99
Next Day Delivery
£6.99
24/7 InPost Locker | Shop Collect
£2.49
Evri ParcelShop
£3.99
Evri ParcelShop | Express Delivery
£5.99
Premium DPD Next Day Delivery
£6.99
Bulky Item Delivery
£4.99
Northern Ireland Super Saver Delivery
£2.99
Northern Ireland Standard Delivery
£4.99
Unlimited free delivery for a year with Unlimited Delivery for £14.99
Please note, some delivery methods are not available for products delivered by our brand partners & they may have longer delivery times.
Something not quite right? You have 21 days from the day you receive it, to send something back.
Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.
Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.
Click here to view our full Returns Policy.
Pure Tone Glow™ x Kimberley Walsh LED Face Mask is a lightweight, high-output at-home LED light therapy mask designed to help reduce the appearance of fine lines and wrinkles, improve the look of firmness, calm the appearance of redness and restore a healthier-looking glow. Created by Pure Tone Aesthetics in collaboration with Kimberley Walsh, Pure Tone Glow™ combines 216 LEDs, five carefully selected light wavelengths and an irradiance output of 30–52 mW/cm² to support a more advanced at-home LED skincare routine. Red 630nm, Blue 415nm, Yellow 590nm, Infrared 850nm and Deep Near-Infrared 1072nm light work together to target multiple visible skin concerns, including dullness, uneven tone, blemish-prone skin, fine lines and loss of radiance. Made from soft, flexible silicone, the mask weighs only 93g and features built-in eye protection, a comfortable non-contact 10–15mm light distance and an IP67 waterproof design for easy cleaning. Pure Tone Glow™ also includes Radiance Dual-Action Serum, formulated with Niacinamide, Peptides, Hyaluronic Acid and antioxidants to hydrate, brighten and support smoother, fresher-looking skin. Apply the serum to clean, dry skin, wear the mask for your chosen treatment cycle, then follow with your usual moisturiser. What’s included: Pure Tone Glow™ LED Face Mask, Remote Control, USB-C Charging Cable, Storage Case and User Guide.
How to Use Pure Tone Glow LED Face Mask 1. Cleanse your skin - Begin with freshly cleansed, dry skin. This helps remove impurities and prepares your skin for your LED mask session. 2. Apply Radiance Dual-Action Serum - Apply a few drops of Radiance Dual-Action Serum evenly across the face and neck. This helps hydrate and prepare the skin before your light therapy treatment. 3. Fit the mask comfortably - Place Pure Tone Glow LED Face Mask over your face and adjust the fit so it feels comfortable. The non-contact design is created to sit approximately 10–15mm from the skin. 4. Select your treatment time - Choose your preferred session time. Pure Tone Glow can be used for 10, 15, 20 or 30 minutes depending on your skin’s sensitivity and routine. 5. Relax during your treatment - Use the mask while relaxing at home. The soft silicone design, built-in eye protection and lightweight 93g structure make it comfortable for regular use. 6. Finish your skincare routine - After your session, reapply a little more Radiance Dual-Action Serum if desired, then follow with your moisturiser to help seal in hydration. 7. Repeat consistently - For best results, use Pure Tone Glow 3–5 times per week. Many users notice a fresher post-treatment glow quickly, while improvements in fine lines, firmness, tone and clarity usually build gradually with consistent use.
Free delivery on all order over £75 (exc. Bulky Item Delivery)
Super Saver Delivery
£2.99
Standard Delivery
£3.99
Express Delivery
£5.99
Next Day Delivery
£6.99
24/7 InPost Locker | Shop Collect
£2.49
Evri ParcelShop
£3.99
Evri ParcelShop | Express Delivery
£5.99
Premium DPD Next Day Delivery
£6.99
Bulky Item Delivery
£4.99
Northern Ireland Super Saver Delivery
£2.99
Northern Ireland Standard Delivery
£4.99
Unlimited free delivery for a year with Unlimited Delivery for £14.99
Please note, some delivery methods are not available for products delivered by our brand partners & they may have longer delivery times.
Something not quite right? You have 21 days from the day you receive it, to send something back.
Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.
Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.
Click here to view our full Returns Policy.
Extend your warranty and protect your purchase against accidental damage and defects.
Protects your new Pure Tone Glow™ x Kimberley Walsh LED Face Mask - Red Light Therapy & Anti-Ageing Skincare Mask against breakdowns and faults once the manufacturer's warranty period is over.
Covers issues not included in your manufacturer's warranty, such as accidental damage or theft.
Get a replacement or a cash refund up to the full amount you originally paid for it.
FAQs
XCover is an authorised protection provider for Debenhams, with over 7 million customers globally and an average 4.7 out of 5 stars from thousands of reviews on Google and Trustpilot. XCover's simple, fast and stress-free repair and replacement process delivers peace of mind if your item is stolen or it has damages or defects that aren't covered by the manufacturer's warranty.
XCover's simple, fast and stress-free repair and replacement process delivers peace of mind if your item is stolen or has damages or defects that aren't covered by the manufacturer's warranty. XCover’s easy, digital process is simple with quick payouts on approved claims.
Before submitting a claim, you need to gather all the details and documents to support your claim. This helpful article has a guide to what documents you may need based on your claim reason.
When you're ready to submit your claim, log in to your XCover Account, select the XCover Protection you would like to claim for and then select ‘Make a Claim’.
The XCover claims process is quick and hassle-free, with payment or reimbursement for approved claims processed instantly. The dedicated team at XCover aims to complete 95% of claims within 3 days of claim submission, so keep a close eye on your emails to ensure there’s no delay.
For more information about claims submission, please check XCover Help.